Instructables

Step 4: Forming and setting the wire

Picture of Forming and setting the wire
C:\blightdesign\DOCS\instructables\IMG_1505_small.jpg
C:\blightdesign\DOCS\instructables\IMG_1506_small.jpg
C:\blightdesign\DOCS\instructables\IMG_1507_small.jpg
C:\blightdesign\DOCS\instructables\IMG_1509_small.jpg
C:\blightdesign\DOCS\instructables\IMG_1511_small.jpg
Bend the dull end of the wire into a short "J".

Poke the sharp end of the wire through the bottom of the crane and pierce the back.

Fish the wire all the way through, setting the "J" in the hind quarters of the crane.

Make sure the wire is secure. Pinch the wire if you need to.
 
Remove these adsRemove these ads by Signing Up