Print PDF
Favorite
Email
Step 3Building the frame.
The back wing-clip is connected to the middle frame you constructed in the last step.
Place the V between the two bent parts of the L you made, and use the pliers to clamp the Ls tightly over the wing-clip. Make sure that the point of the V is pointing up into the frame.
You are now ready to add the band and the wings.
Place the V between the two bent parts of the L you made, and use the pliers to clamp the Ls tightly over the wing-clip. Make sure that the point of the V is pointing up into the frame.
You are now ready to add the band and the wings.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
