Print PDF
Favorite
Email
Step 2Cutting and Rounding them up
Make sure your knife or tool can cut them perfectly. breaking them with your bare hands will ruin the perfect cuts.
(Okay since the damn thing won't let me put notes on here I will tell you the cuts)
The 3 and a half inch is the handle
The 5 and a half inch is the barrel but you only need one of them so choose which one lives and which one is trash/recycle.
The 5 inch on the bottom is the body so that is needed critically.
Finally the 3 Inch is the trigger. at least 3 inches would be fine.
(Okay since the damn thing won't let me put notes on here I will tell you the cuts)
The 3 and a half inch is the handle
The 5 and a half inch is the barrel but you only need one of them so choose which one lives and which one is trash/recycle.
The 5 inch on the bottom is the body so that is needed critically.
Finally the 3 Inch is the trigger. at least 3 inches would be fine.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
