Instructables
This costume aims to look more realistic by creating the illusion that it can twist. This illusion is achieved by the exaggerated clevis between the tiles. Although this subtle detail requires a lot of work, it goes a long way toward making the cube look more realistic. enjoy...
 
Remove these adsRemove these ads by Signing Up

Step 1: What You'll Need

Picture of What You'll Need
cardboard-box-open-lg.jpg
Chalkboard-Contact-Paper.jpg
contact_paper.jpg
silicone_caulk_removal_tool.jpg
- Black Duct Tape (Masking tape is ok, but isn't as strong. I don't recommend it)
- Utility Knife (Be Careful!)
- Cardboard Box Approx. 3ft Square
- More cardboard (3/4" thick may be rare, but it gives the best results. You can also use thinned cardboard for the tiles and then stack them up to make them thick [more work])
- Contact paper (White, Yellow, Green Blue, Red, Orange [do the nerds who will see you a favor and DO NOT substitute different colors]) 

Step 2: Find a Box

Picture of Find a Box
DSC05078.JPG
1. Find a Box you can fit it

2. cut holes for your arms and head.

Now it's a party!

Step 3: Find another Box

I used  a different box (about the same size as the first one) made of 3/4" thick cardboard to use for the tiles

you'll need to calculate the size of you tiles based on the size of the base box you start with,

Plan to leave about 1" between tiles. Also, plan to have the edge/corner tiles hang over the edge by the amount of the thickness of your tiles. 

You'll need 44 tiles. 9 tiles x 5 sides (none on the bottom) - one full tile missing for the head hole. 

after I cut my tiles with a knife I cut off the corners with a band saw to "round" the edges (Optional)

Step 4: Start Taping

1. I recommend Taping two tiles together, then taping them to the box. that way they look like two faces on a sub-cube. 

2. Same idea for the 'Corner pieces', tape 3 tiles together, then tape that 'partial cube' to the box. 

NOTE: You may want to make the hole big enough for your head, but then have the top tiles hinge down to fit around your neck so you don't have extra space all the time.
mkovacs12 years ago
Just letting you know, the final picture of where your using it as a table, the colors are off, If it was an actual puzzle, you wouldnt be able to solve it with out removing stickers!
designerd (author)  mkovacs12 years ago
Yeah, i know. I based in on a possible design but wasn't able to do it because I ran out of certain colors. It's a minor oversight that only the truly committed would notice. congrats.
majorson2 years ago
Nice guide! Visit my "How to solve a Rubik's Cube for the first time"
instructable as well:



http://www.instructables.com/id/How-to-solve-a-Rubiks-Cube-for-the-first-time/
THANK YOU. so excited to make this!!!! :D
Awesome idea! I'm TOTALLY using this for halloween. And thank you for making the instructions so easy and step-by-step.
My only question atm is the colorful tiles. Why do you have to cut them oversized? Did you add MORE tape once they were on the box?
I was wondering if it would work by just cutting the colorful 'squares' as big as the tiles are, and gluing them on. Wouldnt that be easier?
designerd (author)  RubixCubeFTW3 years ago
The size of the tiles is a little less than 1/3rd the length of the box. They are a little undersized so that there is a slight gap between each tile. This makes the cube look segmented (like a real Rubik's cube).
To make the squares look somewhat 'round', should I just cut up duck tape to fill in the corners?
designerd (author)  RubixCubeFTW3 years ago
Yeah, or you can tape the corner tiles together separate from taping them to the cube.
oh alright. That makes sense. But how did you make the corners of the squares look rounded?
mfinn33 years ago
Does this step come before the previous step? Please Reply!!
designerd (author)  mfinn33 years ago
sorry it's taken me forever to respond :(

It is not very important whether you color the tiles first then attach them, or color them after they've been attached. I applied the colored contact paper after the tiles were attached because i wanted to model it after a realistic cube pattern, but wasn't organized enough to plan it ahead (this was a October 30th project)

hope that's helpful
mcontreras33 years ago
Awesome. imma gonna make this year for halloween.thanx
kt0043 years ago
what was the measurement of your box and the tiles u had
donotreg3 years ago
im going to try this but i have one question...
is the bottom ( the part where my feet stick out ) supposed to be cut off?
designerd (author)  donotreg3 years ago
It's up to you. i cut the bottom off, it can make it a little easier to get it on.
Andrew Ryan4 years ago
 Well I finished it.....like I said in my last comment I had a hard time finding me a box. But what I did was I took a VERY LARGE sofa box and cut it down to the exact size then taped them together. It worked out perfect and I finished just in enough time for Halloween.

heres a pic of me wearing the cube.

 i1014.photobucket.com/albums/af261/Prankster369/IMG_0270.jpg
designerd (author)  Andrew Ryan4 years ago
Wow, looks great. Excellent job. Glad to see people spreading the Rubik's cube love
Andrew Ryan5 years ago
  I'm having a very hard time finding a good box to use......I love your costume....I have been solving the cube for 2 years so when Halloween came around everyone said "Hey Dude Be A Rubik's Cube". So thats when I started looking around on the net for ideas. I think yours is the best Ive seen. So like I said the only problem I'm having so far is the fact that I cant find a good square box that fits me.
designerd (author)  Andrew Ryan5 years ago
you may have to get an over-sized rectangular box and put/paste it to be square and fit you. good luck, and happy cubing
 I'm making one like this. I got a 24X24X24 sized box and it fits pretty well. 
Designerd's cube is a smaller fit. I mean it's pretty much up to you, 24X24X24 or a smaller box (15-20). I hope that helped you, if it didn't please let me know.
Thanks! 
WOW THAT'S SO INGENIOUS!
Awesome!
Notbob6 years ago
I have a friend who would love this, simply I must let him know! so cool!!!
so cute thanks for sharing I think I will try to make a couple for my kids this oct.!!!!
I really dig this thing. That is a fantastic job. And it's always nice to put a little effort into a halloween costume. I'd wear that out to a club too though. *wink*
Doctor What6 years ago
not nerd, GEEK
Doctor What6 years ago
cool!! i'm gonna make this, even though it's past halloween
mikesty6 years ago
Good job. The tape and the added panels give it a great look - if I were making it, I would have just colored them in and called it a day.
mrmath6 years ago
Did you win any contests? It certainly looks like you should have!
hectahv6 years ago
constructive, huh? well, the picture really looks nice. and i took them. really, though, it looks awesome.