Picture of RumbleMouse
Do you love how your friend's Xbox controller vibrates every time he mercilessly shoots you in the face? If you wish you had this wonderful feedback feature on your PC, now you can!

This is a project that I did several years ago, but I photographed and documented it well enough that I can do a write-up here without any trouble. Excuse the photographer, he was young and reckless.

The simple idea behind this mouse mod is taking a small motor with an offset weight on its shaft, and mounting it in a PC mouse. These motors are easy to harvest from an old rumble-equipped Playstation or Xbox controller.

Step 1: Materials and Tools

Picture of Materials and Tools
You'll need some stuff for this project, but its all cheap, and the tools are simple.

- USB optical mouse
- Off-center weighted motor ( 5V )
- Thin metal or plastic sheet
- Bondo or body filler
- Spray paint
- Spray primer
- Wire
- Switch
- Heat-shrink tubing
- Solder

Safety Equipment:
- Goggles
- Gloves
- Sanding mask

- Drill
- Tin snips
- Hot glue gun
- Sandpaper (80, 120, 220)
- Soldering iron
- Needle File
1-40 of 110Next »
Krayzi993 years ago
dude... nice!
cheesebigot5 years ago
I used this mod a few months ago for April Fools' Day. I used an old cell phone vibrational motor and wired it to my girlfriend's mouse while she was gone. She came home, sat at her computer, double-clicked an icon and jumped sky high! Thanks for the project idea!
mattthegamer463 (author)  cheesebigot5 years ago
Thats pretty great, man.
zatek5 years ago
Nice edible!

I did this in a Logitech G500, hooked up all the connections in the mouse to two copper plates on the inside of the weight cartridge slot. Then I proceeded to make a rumble pak for it that would go in the weight cartridge slot!

Just a hint, those soldering connections (+5v to the mouse button) made it act weirdly so whenever my rumble pak is on my LMB also triggers the "browser back" button. However you could either map it off the mouse with Logitech Setopint or integrate a switch in it so it only is on when you're gaming.
can you make it so when you like playing a game such as half life of halo and on console versions the controller rumbers when you fall, get hurt or are shooting could you make the mouse do that?
Well, no. 

You would need to develop software that would send a signal to a chip inside the mouse. It easily be 30 times more work than in this Instructable. This method is just using the mouse button as a triggering method for the motor, using only hardware piggybacking on the mouse.
harigast6 years ago
i just got an idea from this! replace any normal rumbling controler motor and weight with something that electrocutes you. like a stun-gun to the palms. then you will really really not want to get shot. i guess you could even plug the leads to something even better like a jacket.
many other people agree that this is a good idea, ironically, they also support the death penalty and the electric chair... ARE YOU OUT OF YOUR MIND?!
i guess you could make it out of those electroshock abdominal belts that were popular in around 2000AD. then its like working out when you play a game. now i just need to find the ones i was buying in thrift stores.
H3xx harigast6 years ago
just use one of those prank shock lighters, pens, condoms, etc. :)
airecrist H3xx5 years ago
prank shock condom? ouch that sounds painful
H3xx airecrist5 years ago
Then don't get shot! XD
mattthegamer463 (author)  beast_mode6 years ago
I'll agree, it does sound dangerous. I'd be concerned about nerve damage over a long-term period.
expidition5 years ago
I just made one these a few weeks ago it rocks!
Does it have to be USB? Can I just use a PS/2 mouse instead or a maybe even a wireless mouse?
a ps/2 mouse would work the same way, but a wireless mouse? that would probably pretty hard on the batteries. I have a logitech mx revolution mouse, and its batteries only last 2-3 days at the most. fortunately its rechargeable and charges in 3-4 hours, usually while i am asleep or at work.
heathbar646 years ago
I wanted a vibrate feature for an invention. I tried a hobby motor with a blob of jb weld cast onto the shaft off center, but it's not heavy enough. I would like to figure out how to mount a heavier weight securely. Also, I found that a cell phone has a vibrator which is only about the size and shape of a button battery, but has a pretty good buzz. one of those might work pretty good for your mouse.
H3xx heathbar646 years ago
jb weld and a fishing weight might do the trick. but i'd go for an old ps2 controller, or if you have one lying around, an n64 rumble pack. that thing, as i remember, had a decent rumble to it.
mattthegamer463 (author)  heathbar646 years ago
Theres a big difference in the feel of a cell phone vibrate and a controller rumble. The weight is much more and the speed is much lower.
dowd956 years ago
Thanks man, I modified my xBox 360 controller recently and needed somewhere to put the rumbler i didnt have space for
epeefencer6 years ago
How can you sync it to go off at the right time though?
mattthegamer463 (author)  epeefencer6 years ago
It rumbles when you click the left mouse button. Thats it.
thats still really awesome :D
marselsipod6 years ago
wait, so it rumbles non-stop? O.o
Marselsipod Well not exactly this instructable describes putting in a switch to turn it on and off. it will rumble when the switch is set to on and when you left click wait, right?
mattthegamer463 (author)  squirrelMLM6 years ago
While your finger is pressed down, it rumbles.
oh thats a lot better
JellyWoo6 years ago
Would a cell phone vibrator motor work?
if it is rated for 5V and fits in the mouse, sure :)
well what if you would put a resistor? i have a 3v motor so cant i just put a resister in?
Ktooms6 years ago
im kind of a noob with electronics i need uber help with the wiring, the picture makes perfect sense but the worded description messed me up. help?
mattthegamer463 (author)  Ktooms6 years ago
Basically, the circuit is 3 components: Power Switch Motor In our case, the power comes from where the USB cable connects to the mouse board. The motor is obvious, and the switch is the mouse left-click button. We solder wires to the bottom of the mouse board, to the contacts for the mouse button. Then, when you click, it triggers the motor. Easy.
coolacid6 years ago
There are smaller weighted motors, like the ones in the cellphones. Maybe one of those will fit perfectly into the mouse.
KCLT coolacid6 years ago
@coolacid thats a good idea.... there can be however a different voltage for that one ... will try that :D
twitch06016 years ago
Hey This Was A great Tutorial. I Never thought of it. Tho i should of. I just got done making one for myself. I didnt have to cut a hole in the mouse luckily to fit the motor. I just had to mess around with the placement and found a good spot. If anyone Wants to se any pics or anything just email me. Thank you for the Instructable.
I'm going to use the rumble motor I got from disassembling my WII remote.
its cheaper if u use a cheap ps2 remote
go to radioshack and buy the 3v rumble motor, its super small.
i already opened my remote because it wasnt working.
1-40 of 110Next »