Introduction: How to Fill a White Page

Still searching...

Comments

author
broken bob (author)2014-06-24

nice 'ible

author
kirktheturk (author)2013-03-08

I saw a cool spin of of this but the person than loaded a spike into the other end to fire

author
wire-nut (author)2012-11-06

What freeza36 was asking about is called head spacing. But you are not putting bullet in it but a blank. So you don't have any back pressure. Also if load a live round in it you will the BATF and you back.

author
bricobart (author)wire-nut2012-11-07

Oops, I see! It seems I answered completely beside the question.
No worries the casing comes out, I shot 10 or more times and it stayed on its place. Thanx!

author
bricobart (author)2012-11-05

Nope! Casing stays alive. Put a potato in the barrel and you have a potato shooter. That will be my next upgrade ;-)

author
freeza36 (author)bricobart2012-11-05

That sounds very fun

author
bricobart (author)freeza362012-11-05

;-)

author
freeza36 (author)2012-11-04

Is it posinle that a nit of the casing would come out of the barrel?

author
bricobart (author)freeza362012-11-04

You mean a piece of the bullet? I don't think so, because the casing of the fired bullet seemed really intact when I took it out. There was no difference in appearence with a bullet fired with the HILTI, for example.

author
freeza36 (author)bricobart2012-11-04

I see. I thought that maybe the small explosive would shatter the casing, but I guess not.

About This Instructable

7,659views

84favorites

License:

Bio: I made a beer mug with only a knife & a hatchet. I think that says a lot about me.
More by bricobart:IKEAK - soft floor survival kayakA Day in the LifeHow to say thank you to your followers
Add instructable to: