Print PDF
Favorite
Email
Step 5Mounting the Audio Jack
Before you put your cart back together you will need to drill your hole for your jack. Grab the top half of your cart shell and drill your hole in the upper right hand side (im sure the left is just fine too) as seen in the image below.
You can now set the 2 halves of the cart side to side and put your PCB pack into place. See the pic below for an example of how to run your wires.
You can now set the 2 halves of the cart side to side and put your PCB pack into place. See the pic below for an example of how to run your wires.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
