Print PDF
Favorite
Email
Step 6PREPARE THE BATTERY TERMINALS
.
The battery terminals are nothing more that two pieces of thin metal shielding I salvaged from an old cassette tape deck. I just cut two pieces, soldered a small wire to each piece, and attached them to the 2 DIP sockets using super glue. I also glued the 2 pager motors to the 16 pin DIP socket.
.
The battery terminals are nothing more that two pieces of thin metal shielding I salvaged from an old cassette tape deck. I just cut two pieces, soldered a small wire to each piece, and attached them to the 2 DIP sockets using super glue. I also glued the 2 pager motors to the 16 pin DIP socket.
.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
