Introduction: SOLAR BAG

Picture of SOLAR BAG

THIS IS AN SOLAR BACKPACK TO CHARGE ALL YOUR DEVICES WITH A REMOVABLE POWER BANK

Step 1: GRAB EM ALL

Picture of GRAB EM ALL

Solar panel
bag
powerbank
connectors
gluegun
soldering iron

Step 2: Attach the Connctor to the Panel

Picture of Attach the Connctor to the Panel

Solder a diode and the connector through wires to the solar panel

Step 3: MAKE THE POWER BANK READY

Picture of MAKE THE POWER BANK READY

ATTACH THE FEMALE CONNECTOR TO THE POWER BANK

Step 4: Paste the Solar Panel on the Bag

Picture of Paste the Solar Panel on the Bag

Using glue gun attach the solar panel to the bag

Step 5: DETAILS

Picture of DETAILS

this is a 2600mah powerbank or more as u wish
charging time is 10 hours for power bank
then it can charge a iphone once
solar panel is 6v .1watt

Step 6: ALL SET READY TO GO

Picture of ALL SET READY TO GO

FIRST CHARGE YOUR POWERBANK IN THE SUN WHILE OUT

Step 7: NOW YOU CAN CHARGE YOUR PHONE

Picture of NOW YOU CAN CHARGE YOUR PHONE

charge ur phone or any other device with the removable power bank

Comments

Oms2burn (author)2017-09-25

Very cool idea. Might want to stick to lighter (white, light grey) backpacks / bags. I could see people laying the bag out to charge their phone... hours later, the inside of the bag is a zillion degrees (overheated electronics, melted chocolate bars....).

celalboz (author)2016-11-14

what is the value of the resistor in the diagram?

Mr Chicken on grill (author)2016-06-21

Sounds very interesting, i'll try it out. As for building it, I was wondering will this degrade my power bank life span?

not atall as we are directly charging the battery

About This Instructable

6,782views

80favorites

License:

Bio: If you can't make it simple,you don't have right to make it...
More by parvgupta001:PARTY LIGHT UP BELTDiy Solar ToyDiy Air Purifier
Add instructable to: