Print PDF
Favorite
Email
Step 5Mount the components
Trim the shafts of the switch and the potentiometer to the right length to fit your knobs with a hacksaw or cutting disc with a rotary tool. File down any sharp burrs.
Mount the components in the shell and make them snug. Don't over tighten. You don't want to strip the threads. :) Also mount the container for the transformer. A metal container will help shield from outside interference.
Wait to mount the speaker until step 7.
Mount the components in the shell and make them snug. Don't over tighten. You don't want to strip the threads. :) Also mount the container for the transformer. A metal container will help shield from outside interference.
Wait to mount the speaker until step 7.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
