With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I know it's nothing new but I wanted to share my phaser mod with you guys..... I bought the phaser on ebay for 10.00 U.S. dollars. Then I bought a hig...
About the laser: It is commonly known as the New Wish laser from Deal Extreme. A similar laser can be found at Radio Shack. Mine was niether of the t...
I used a dremel with a cutting wheel to separate the laser from the housing. Be careful not to cut the housing too deep or you will cut the laser itse...
First take apart the toy with a screw driver and remove every single piece. It might help to take a picture so you can remember how it goes back toget...
The laser is going to replace the light bulb so your going to need to remove the tabs.
Your going to have to enlarge the hole where the bulb used to pass through slightly. Only the back end of the laser will pass through the hole. Also r...
It's pretty simple.....
When soldering the positive wire to the body of the laser it will get very HOT!! -So make sure you do it quickly.
Hope this helps.....
:)
Not finished with the re-paint but it looks good enough for now....I know that it dosen't match the episode exactly but I like my weapons silver alumi...
Remove these ads by
Signing Up
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »
1. What power green laser do you need to pop balloons?
2. Which TNG cricket phaser toy is that? The Playmates or Galoob? It looks like the Playmates, but I wanted to make sure. Thanks.
It looks awesome and I really want to do it.
First of all I purchased the laser while I was in asia so the label was fake!
It claimed to be 200mw but it can't light matches so my best guess would be around 15-20mw if anything. Popping ballons needs to be dark colored of course and depending on the weather and how close you are will affect popping time.
I'm using a Playmates verion type 1 phaser.
Please take your time with all your cuts because I don't want you to ruin your green beam:) ----let it cool down when the cuts get HOT!!! and take your time.