Print PDF
Favorite
Email
Step 2FRONT END
I made the front end out of 1x4, 1x6, 1x12 pine.
a table saw i nice for ripping the angles.
i also made a toy box in the front by hinging the 1x12 hood, and putting a piece of 1/4 plywood to devide the cab area as seen in photo.
a table saw i nice for ripping the angles.
i also made a toy box in the front by hinging the 1x12 hood, and putting a piece of 1/4 plywood to devide the cab area as seen in photo.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
