This is a little action figure made from tape and wire, you'll need some play-doe to stand him up.
Remove these ads by
Signing UpStep 1: The basic frame...
First, take two peices of wire and twist them together so that there is alittle bit left over on the ends...
Flag this comment as:
Not NiceInappropriateSpam
16
iproberry1 says:
Apr 26, 2012. 5:53 PMReplycool you made a step-by-step!
20
vroom...vroom... (author) says:
Apr 26, 2012. 8:17 PMReply
Hooray for me!
16
iproberry1 says:
Apr 27, 2012. 3:17 PMReplyyeah...
Visit Our Store »
Go Pro Today »
