Introduction: *SUPER EASY* Nerf Mega Magnus BlackOps Paintjob With Removable Silencer

Picture of *SUPER EASY* Nerf Mega Magnus BlackOps Paintjob With Removable Silencer

In this instructable, we will be giving a nerf mega magnus a sleek black paintjob and a removable silencer.

Step 1: Gather Your Materials!

Picture of Gather Your Materials!

These are the materials you will need:

  • black spray paint
  • x-acto knife
  • scissors
  • drill
  • (optional) masking tape
  • super glue
  • empty film canister

Step 2: Spray Away!

Picture of Spray Away!

Tip: cock your gun halfway before painting.

Step 3: Make the Silencer!

Picture of Make the Silencer!

1. Use the x-acto blade to cut the closed end of the canister as evenly as you can. You can clean up the edges with the scissors.

2. Use the drill to make 5-10 holes around the sides of the canister.

3. Cut a circle out of the lid, and glue it to the muzzle of your gun.

Step 4: Finished!

Picture of Finished!

In less than 15 minutes (excluding drying time) you have a custom Mega Magnus ready for nite-ops. To attatch the silencer, just put it onto the lid you glued on.

Comments

tomatoskins (author)2016-02-05

Really cool paint job! Can't wait to see what else you come up with!

OrangaCHANG (author)tomatoskins2016-02-05

Thanks. I was just really bored today.

About This Instructable

918views

9favorites

Bio: Ray Chang 8th Grade Engineer RC Enthusiast I like knives. The Caran d'Ache 849 is still a classic.
More by OrangaCHANG:How to Change the Oil in your RC Car's Shocks*SUPER EASY* Nerf Mega Magnus BlackOps Paintjob with Removable Silencer
Add instructable to: