Print PDF
Favorite
Email
Step 3Make a 9V power supply
Now solder the 9V battery snaps to the power jack.
I used heat shrink to cover the terminals but hot glue would work.
Insert the power jack in the hole and glue it.
I also glued Velcro to the back of the tin.
I used heat shrink to cover the terminals but hot glue would work.
Insert the power jack in the hole and glue it.
I also glued Velcro to the back of the tin.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
