Print PDF
Favorite
Email
Step 7SOLDER IT
I used the current limiting resistor calculator to figure out the resistors to use.
I used 9 LEDs.
3 sets of 3 LEDs soldered in series with a 180ohm
resistor for each set.The sets were then soldered in parallel.
I then covered all the wires with hot glue,
I used 9 LEDs.
3 sets of 3 LEDs soldered in series with a 180ohm
resistor for each set.The sets were then soldered in parallel.
I then covered all the wires with hot glue,
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
