Samsung Epic 4g Inductive Charger

Step 4 Reassembly

Ok... So now we want to simply reverse the steps we did to disassemble... Put the board back into the case with the camera and audio attached. Watch where you run the wires and visualize the case closing in on top of it.... The attached pictures are my routings but you can do it whichever way you would like... :D

After getting the case back on I noticed that it was pinching the wires and I was not a fan of it so I took it apart again and cut a small piece out right where the battery leads are. You can choose another spot if you think it will be better.