Print PDF
Favorite
Email
Step 5Inserting the Flash Drive
Now we can start to test-fit the bare-board flash drive into the metal shell. It seems to fit okay. Still need to fix it in place, though.
One other final detail to take care of: The back side, where the circuit board will be resting, has some metal parts that the back side of the circuit board will be touching-- so we need an insulator there. I had an old piece of clear blue heat-shrink tubing that happened to fit well, but a piece of electrical tape would have done the job too. Once that was added, it all looked safe and still fit together.
One other final detail to take care of: The back side, where the circuit board will be resting, has some metal parts that the back side of the circuit board will be touching-- so we need an insulator there. I had an old piece of clear blue heat-shrink tubing that happened to fit well, but a piece of electrical tape would have done the job too. Once that was added, it all looked safe and still fit together.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
