Print PDF
Favorite
Email
Step 12Solder the lamp Cord
Double twist the power leads on to the lamp cord and solder the leads.
Be sure that you run some heat shrink tubing onto the leads before you connect the leads.
After soldering slide the heat shrink tubing on to the bare sections of wire and heat with the soldering iron to secure the connections.
Be sure that you run some heat shrink tubing onto the leads before you connect the leads.
After soldering slide the heat shrink tubing on to the bare sections of wire and heat with the soldering iron to secure the connections.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Sep 2, 2009. 4:29 AMbronz
says:
These Two white wires how much current be given to them.As I use a adopter with these wires, there is already a circuit in front of you. So explain the amount of current be supplied to these white wires. Thanks.
Reply
 |
Add Comment
|
