Print PDF
Favorite
Email
Step 9Drill your mounting hole
Center punch the location where your length and width measurements cross and drill your mounting hole.
You will need to drill an 1 1/4" hole in the base plate.
This hole is slightly under sized. You will need to file the hole slightly larger to fit the PVC pipe.
I used an old soldering iron to enlarge the hole.
You will need to drill an 1 1/4" hole in the base plate.
This hole is slightly under sized. You will need to file the hole slightly larger to fit the PVC pipe.
I used an old soldering iron to enlarge the hole.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
