Step 2: Saw the frame
The cuts are shown in the photo.
Hacksaw off the top tube and seat tube.
Cut through the bottom bracket. Make sure the bearing cups are out of the bottom bracket as these will be harder to saw through than the bracket itself. Clean up the parts for painting later.
Hacksaw off the top tube and seat tube.
Cut through the bottom bracket. Make sure the bearing cups are out of the bottom bracket as these will be harder to saw through than the bracket itself. Clean up the parts for painting later.
Remove these ads by
Signing UpFlag this comment as:
Not NiceInappropriateSpam
Visit Our Store »
Go Pro Today »
