Introduction: Scorpius Constellation Keychain
in this instructable I will show you how I made this simple and cool scorpius constellation keychain.
You can watch the video above to see the making in action,
I hope you like this project.
Step 1: Materiels
I used to build this keychain:
1 - A piece of aluminium, (or wood)
2 - Rotary tool (you can use a file and a drill)
3 - Glue.
4 - Piece of paper.
6 - 432p/400p sand paper.
7 - Hacksaw.
8 - Small bit.
9 - Mallet or hammer
Step 2: Making the Constellation
1- I took a piece of paper, then I copy the stars of the scorpius constellation using a pencil.
2 - Then I glued the paper on the aluminium piece.
3 - I used nail and a mallet the mark the stars on the aluminium piece.
4 - I attached a small bit to the rotary tool, then I drilled the wholes (stars) through the aluminium piece.
Step 3: The Shape of the Key Chain
1 - Using a Hack saw I cut the aluminium piece to a rectangle form.
2 - with the rotary tool I sand the edges.
3 - then I rounded the corners.
4 - I add a letter N with a stamp, (optional)
5 - I drilled the last whole to attach the key chain to it.
Step 4: Final Step
Finally I sand the surface with 432p sandpaper then with a 400p sandpaper, then I attached the keychain.
I hope you liked this project, I'm waiting for your feedback,
Thank you for your time
We have a be nice policy.
Please be positive and constructive.