With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
I have written this Instructable, so that you can see how to construct the above from wood scraps Instead of Cardboard (funnily enough, Card is my usu...
Right well, to help you find items used I am going to give you the Maplins product codes I have also lifted a few pictures from their site so as you c...
What we need to do first is cut out the base and clicker for the machine. If you intend to make a single/stand alone unit only cut out one base and ...
Before you nail ANYTHING down your going to need to glue/tape or otherwise affix toy aluminium conductors onto both the base and the clicker. I found...
Regardless of if you are making a stand alone unit or a two way unit, your going to need to think about placement... It is now at this point when you...
so now you have the buzzer section pretty much glued down, your going to need to add the wires in the next two steps. This step is to give you an idea...
Okay so for just a sound buzzer circuit/ setup.... all you need do, is to wire your switch between your battery abd buzzer like in the circuit diagram...
Okay in the original I'ble I had a REAL tough time working out what was connected to what, so hopefully from my little diagrams you can see how its al...
Well... That is it... Hope it helps you understand the Original Instructable a little better... please let me know if you have any questions or whatev...
Remove these ads by
Signing Up
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »