Print PDF
Favorite
Email
Step 5Make the balsa wood slider
1. Cut a piece of balsa wood that fits loosely from front to back in the inlay and is about 1/2" shorter than the inlay side to side.
2. Glue the head of a screw to the back side of the wood slider. Make sure it lines up with the slot in the mesh inlay of the lid.
When the balsa wood slider is placed in the inlay make sure it slides it back and forth easily with very little resistance.
2. Glue the head of a screw to the back side of the wood slider. Make sure it lines up with the slot in the mesh inlay of the lid.
When the balsa wood slider is placed in the inlay make sure it slides it back and forth easily with very little resistance.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
