Print PDF
Favorite
Email
Step 2Open the mouse
Unfortunately I used a mouse for this Instructable, which I had already disassembled ages ago and gotten rid of the outer shell.
But basically look for screws on the bottom of the mouse, they might be hidden under stickers or little stuck on feet. Make sure you get all the screws out and then the mouse should open nicely. Inside there will probably be more screws keeping the circuit board in place. I have learned that it is good practice to take photos of the circuit as soon as you have opened it because later on if wires come loose or you want to reverse your actions these photos will come in super handy!
So take photos and even notes.
But basically look for screws on the bottom of the mouse, they might be hidden under stickers or little stuck on feet. Make sure you get all the screws out and then the mouse should open nicely. Inside there will probably be more screws keeping the circuit board in place. I have learned that it is good practice to take photos of the circuit as soon as you have opened it because later on if wires come loose or you want to reverse your actions these photos will come in super handy!
So take photos and even notes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
