Print PDF
Favorite
Email
Step 2Make two strap iron plates
Use two pieces of strap iron 1/8 inch thick and 3/4 inch wide. They are each 3 7/8 inches long. Drill a 3/8 inch hole in the exact center of each piece. Drill two 1/4 inch holes equidistant from the 3/8 inch hole so they are (center to center) 3 5/16 inches apart.
Grind a concave in one side of each piece of strap iron to make space for the machined ring on the bottom of the motor carriage. You can see a wear pattern from it in the first photo.
Grind a concave in one side of each piece of strap iron to make space for the machined ring on the bottom of the motor carriage. You can see a wear pattern from it in the first photo.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
