Print PDF
Favorite
Email
Step 9Reassembly
Follow steps 1-5 in reverse order, making sure you don't miss any connectors. Screw everything back in. If the heatsink came off, put it back on. Don't force anything, and make sure there's nothing that could short out the mainboard (like a loose screw underneath)
I routed the wires through to the front of the Dreamcast, and put the circuit board on the corner of the GD-ROM drive, where there's that little flat spot in front of the black plastic. Whatever works in your situation I guess.
Put the cover back on, and screw everything in place, and make sure the disc can spin freely when put in, otherwise you need to crack it open again and just move some things around until it fits well.
Mount the VGA port, VGA select switch, as well as the stereo jack, and plug it all in.
I routed the wires through to the front of the Dreamcast, and put the circuit board on the corner of the GD-ROM drive, where there's that little flat spot in front of the black plastic. Whatever works in your situation I guess.
Put the cover back on, and screw everything in place, and make sure the disc can spin freely when put in, otherwise you need to crack it open again and just move some things around until it fits well.
Mount the VGA port, VGA select switch, as well as the stereo jack, and plug it all in.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
