50 feet range!
2 bullets shot at a time (it's a shotgun!)
Looks amazingly cool!
has a compartment in the stock where you can put extra bullets!
The gun breaks apart if you shake it hard and sharply
no pin guide
This gun can hold alot more bands than a gun with one pin, because this one has 2 firing pins sharing the same elastics.
This would be a good primary war gun, or a good gun if you just wanna shoot some targets!
Step 1: Real/ Fake barrel
1: What you'll make
3: Build the side panels
4: make the grip young padawan!
5: we gonna make this block
6: make all the stuff for the block
7: Put pieces on that tiny panel
8: add another layer!
9: mirror what you just did and add the rest
10: put together, don't get scared of the spider!
11: an ugly picture...... whatever. Add all those blue rods and the white rods.
12: Add that long piece!
13: get two of these and add them on either side
Finito! Good job padawan! Next step!
Step 2: Handle/ back barrel
1: Build all of this. (read image notes!)
2: Build the trigger and get those white rods
3: Add everything shown onto the panel with all of the blue rods.
4: Add the panel with the broken rod and the tan clips and white rods. Also, add the orange connector things too!
5: Add the last panel, the trigger, and that thing on the top. Get 1 more white rod and add them as shown.