Semi-Automatic Relvolver Riffle out of K'Nex

I will show you how to make a semi-auto relvolver riffle out of K'Nex. You can make as many barrels as you want. These are the magazines. You can also put as many rubber bands as you want but don't put too much so that you can't pull the firering pin. Simply look at the pictures for instructions. It fires white (black for me)rods. In this instructable, you will need to sacrifice a lot of pieces. Two gray connector, one gray rod, a yellow connector(me it's gold)and four blue connector. This gun is VERY pricise and shoots VERY far compared to the average K'Nex guns.

Here's a video in which i use my gun. The purpose of the video wasn't on the gun so don't complain and im speaking french in it. Go to 2:15 minutes to see the gun in action. Little different version but same concept.

Link to this video on youtube

Step 1: Stock and Firering pin guide

The layer is five pieces.

Comments

[odysseusesperson]

 i have limited knex and im sure other pple agree with me when i say i dont like destroying my knex

[king kolton9]

funny story once i had hurting hands (from putting knex together) and i hear SNAP!!!! i look at a piece of knex that is flying around the room a HIGH speeds bounceing off walls and literally not loseing any not even a little speed faster than ANY and i mean ANY!!! knexgun could fire (not even 50 rubberbands could beat it) so fast that was litterally a blur for like 10 seconds then i hear SNAP!!!! again and to today it was never to be found

[LvNo1000]

50 rubber bands? Is that a bet? :)

[swasby]

same, its good put it uses lots of pieces and didtroying some

[bounty1012]

its been done before.

[knex1111111111]

By who? I might make it.

[bounty1012]

KillerK did one called TR-8 and TR-32 I think and there was one on KI called the Soothsayer. It was huge.

[mrknex3000]

do you mean knexsayer

[masterchief1257]

awsome

[Matrix-technician]

Awsome gun dude. I would love to build somthing like this but don't have enough peices atm. :) 5*

[BobMarleyFan]

rifle*

[knex1111111111]

I improvised and made it with less pieces and didnt break any.

[StarkIndustries]

this isn't semi auto

[mettaurlover]

HE KNOWS.

[barrett50cal]

i cant cut the yellow connector..im trying to do it with pliers...should i be using those?

[unclepeanuts]

 Nail clippers

[barrett50cal]

nevermind i got it

[drumdom]

what did u cut em with

[mettaurlover]

My preferred method is making DSman's sniper and firing it a few times. Yellows get cut every time. Not so good when you want your gun to fire properly in the case of that thing...

[barrett50cal]

pliers....just hold really tight and twist

[euaoueaoueoau]

the rubber band is winded

[loyamann123]

 Nice 5* and faved

[DJ Radio]

awesome, you have done what I have failed to do.

5* just for that.

[KnexFreek]

 ya

[KnexFreek]

 nice gun very good

[FlutterTree]

Pourquoi est-ce que tu parle si haut?
 

[dwhdwhdwh]

nice gun, very good

[assassin1321]

its a good gun only change i made was i put a rubberband across the area the revolving part gose trough and just spun it then added ammo and it worked better

[tthomasvd]

I have that piece in blue and black ;P

[red impact 80000]

awesome gun

[jojo231195]

salut est ce que tu parle francais car j'ai un probleme a une etape

[Dirtyboyy]

he ,looks sweet , bud i have made it 2 times and , he dont work ... =(

[Electroinnovation]

Hilarious video. Who was that? ur GF? and whats with all the squealing?

[wildar97]

that is a sweet gun

[barrett50cal]

is there any other pieces u can use instead of the green and blue pieces in pictures 4 and 5...cuz i dont have those

[geodez]

no, they are blue 3D clips and cannot be replaced.

[jj65456]

nooooo its a hinge

[geodez]

my bad, i was looking at something else.

[barrett50cal]

watever i already took it apart...

[geodez]

oh.