loading
Picture of Semi-Automatic Relvolver Riffle out of K'Nex
10 janvier 2009 176.jpg
10 janvier 2009 178.jpg
Image 1.png
I will show you how to make a semi-auto relvolver riffle out of K'Nex. You can make as many barrels as you want. These are the magazines. You can also put as many rubber bands as you want but don't put too much so that you can't pull the firering pin. Simply look at the pictures for instructions. It fires white (black for me)rods. In this instructable, you will need to sacrifice a lot of pieces. Two gray connector, one gray rod, a yellow connector(me it's gold)and four blue connector. This gun is VERY pricise and shoots VERY far compared to the average K'Nex guns.

Here's a video in which i use my gun. The purpose of the video wasn't on the gun so don't complain and im speaking french in it. Go to 2:15 minutes to see the gun in action. Little different version but same concept.

Link to this video on youtube

Step 1: Stock and Firering pin guide

The layer is five pieces.
 
1-40 of 114Next »
bounty10126 years ago
its been done before.
By who? I might make it.
KillerK did one called TR-8 and TR-32 I think and there was one on KI called the Soothsayer. It was huge.
do you mean knexsayer
awsome
Awsome gun dude. I would love to build somthing like this but don't have enough peices atm. :) 5*
rifle*
I improvised and made it with less pieces and didnt break any.
this isn't semi auto
HE KNOWS.
i cant cut the yellow connector..im trying to do it with pliers...should i be using those?
 Nail clippers
nevermind i got it
what did u cut em with

My preferred method is making DSman's sniper and firing it a few times. Yellows get cut every time. Not so good when you want your gun to fire properly in the case of that thing...
pliers....just hold really tight and twist
 i have limited knex and im sure other pple agree with me when i say i dont like destroying my knex

same, its good put it uses lots of pieces and didtroying some
the rubber band is winded
loyamann1235 years ago
 Nice 5* and faved
DJ Radio6 years ago
awesome, you have done what I have failed to do.

5* just for that.
 ya
KnexFreek5 years ago
 nice gun very good
FlutterTree5 years ago

Pourquoi est-ce que tu parle si haut?
 

dwhdwhdwh5 years ago
nice gun, very good
its a good gun only change i made was i put a rubberband across the area the revolving part gose trough and just spun it then added ammo and it worked better
tthomasvd5 years ago
I have that piece in blue and black ;P
awesome gun
jojo2311956 years ago
salut est ce que tu parle francais car j'ai un probleme a une etape
Dirtyboyy6 years ago
he ,looks sweet , bud i have made it 2 times and , he dont work ... =(
Hilarious video. Who was that? ur GF? and whats with all the squealing?
wildar976 years ago
that is a sweet gun
is there any other pieces u can use instead of the green and blue pieces in pictures 4 and 5...cuz i dont have those
no, they are blue 3D clips and cannot be replaced.
nooooo its a hinge
my bad, i was looking at something else.
watever i already took it apart...
oh.
ummm i didnt post that comment at 8:23...its11:24
Undermig6 years ago
ok um jai trouver ton video un peut bizzard... pis tu vien tu de quebec?
1-40 of 114Next »