With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
how to make a semi/fully auto marshmellow gun
you will need mini marshmellows,4 pvc 1/2 in. tees,3 pvc 1/2 in. caps,1 pvc 1/2 in. 90 degree elbow,and a 5 ft. x1/2 in. pvc rod. oops i forgot you wi...
the hopper is the thing that makes it able to shoot semi or fully automatic. cut a part off of the rod so it is big enough that it can hold as many ...
the blow hole is what the gun works by.you need to cut a 2-3 in. part from the rod and put it into one side of the 90 degree elbow.then cut another pi...
depending on how long you want it to be cut a part of therod off this will be the longest peice you will ever cut while building the gun.this peice wi...
we will add the hopper to the body. cut a small peice of pipe about 1-2 in. long this will connect to the barrel
to build the handle you need to take the body now with a hopper and cut a 4-5 in. piece from the pvc rod and connect it to the tee.then put a cap on t...
it is the same other than it connects to the other side of the tee
take the blower and another tee witch should be the last one and do the same thing you did for the handles other than the tee being at an angle. if y...
put caps in the appointed areas
enjoy if you have any other ideas please leave comments!!!!
Not NiceInappropriateSpam
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Remove these ads by
Visit Our Store »
Go Pro Today »