Separate Hydrogen and Oxygen from Water Through Electrolysis

Step 4 The Tricky Part

Ok, this is the tricky part. You need to flip the gas collecting container(s) upside down in the med. container, so that no air is trapped in the gas container(s). I do it by holding my thumb over the hole, and flip it really quickly. Its not a huge deal if air is trapped, your hydrogen just won't be pure.

Comments

[wpe35]

i use a 3x5 inch stainless steel plate insulate the edges then use 19 ga stainless wire wrap eqals 10 on each side solid plate is negative wire is positive produce 2/3 liter per minute 6 amp draw at 12vdc heat range is between 140 to 160 degree then use air intake to cool it on vehicle

[daddyo44907]

Excellent output for a 6 amp draw. The temperature however, says something is not right.