Introduction: Set Up a Fastfold Projection Screen

Picture of Set Up a Fastfold Projection Screen

The following will teach you how to set up a 7 1/2 x 10 Fastfold projection screen.

Step 1:

Picture of

Remove contents from box.

Step 2:

Picture of

Unfold screen frame and legs face down.

Step 3:

Picture of

Lock frame and legs into position by sliding all clasps over all pegs. Extend corners of screen frame out into locking position.

Step 4:

Picture of

Attach legs to screen frame by matching tape on legs to tape on frame.

Step 5:

Picture of

Attach legs with cranks through the holes on screen legs and frame.

Step 6:

Picture of

Remove screen from bag and flip frame face up.

Step 7:

Picture of

Unfold screen and spread it over frame. Attach snaps on screen to corresponding grommets on frame. Make sure the skirt grommets on the screen are in position at the bottom of the frame.

Step 8:

Picture of

Fully extend and lock top feet and tilt frame into a standing position. Then fully extend and lock back feet.

Step 9:

Picture of

Attach skirt snaps to grommets at the bottom of the screen.


DIY Hacks and How Tos (author)2016-01-05

Great tutorial. If only the manufacturer's manual was this well written.

About This Instructable




More by Smith4:Set Up a Fastfold Projection Screen
Add instructable to: