With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
share step-by-step photos with text instructions
share one or more photos in one step quickly and easily
share your how-to video
Etsy ListingMake this nice and practical card holder in not time!This card holder is made out of fabric and it's purpose is to hold your credit card, ...
To start this project, you first need to gather some simple materials: 1- Heavy fabric for the outside and light weight fabric for the lining.(Scraps ...
Using the ruler and pen trace 2 rectangle on the poster board or heavy paper. The first template should measure 5 3/4" by 4 1/4" The second template ...
With the pen trace onto the heavy fabric the large template. This will be your card holder outside fabric. Now trace using with the large template ag...
Now you cut and obtained the 4 pieces needed for the card holder. These are: Outside Fabric Two inside pockets and Lining With the pinking shears cu...
Using the pen make two marks on the inside flaps (pockets)making sure they are in the same spot, like I show in the picture. Cut a piece of Velcro pos...
Separate the Velcro and position them just above the marks that you made on each side of the flaps.
Position the Velcro in place and sew it. Make sure that the pieces of Velcro are centered and that you sew them on the right side of the fabric.
The assembling starts here. Lay your outside fabric face down, lining face up and the two flaps or pockets side up like in the picture.
Pin all the pieces together making sure they are aligned and in place. Sew the piece around the edges with a 1/4" seam approx.
Your piece should look like this.
With the pinking shears cut around the edges to avoid the raw edges of fabric from fraying. Cut very close to the outside edge so you don't cut the s...
Fold your card holder in half and press with a warm iron to make a crease in the middle. You can add a little embellishment on the outside center too....
In this cardholder I used a light weight fabric for the outside. Here I used the fusible fabric stabilizer. On sptep 3: I used my large and small temp...
Now you have a nice cardholder for you or to give as a little gift!! That was fast!
Here is how they look on the inside. Put those cards inside!
Tag files as:
Cookie Recipe And A Seven Day (Washable) Recipe Holderby sunshiine
Fabric Walletby yoyotom
Monster Business Card Holderby alittlestranger
Soft-circuit LED Braceletby REACTIVEFashion
Personalized Valentine's Bookmarkby childmade
Hidden Sleeve Business Card Dispenserby jacco1997
How to Sew StitchLitsby katehartman
Personal Sewing Bookby scluck55
Pencil Holder Made of Fabricby MiltReynolds
Weekly Menu Plannerby sunshiine
Download our new apps for iOS and android!
©Copyright 2013 Autodesk Inc. All rights reserved.
PDF DownloadsAs a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.