Sew Warm and Comfy Teddy Bear Slippers

Step 5 The sole

I added another layer of fleece and a layer of foam for the sole giving the slippers greater comfort and durability.

• I used an old pair of slippers to trace the shape and size of the sole onto cardboard (you could trace around your foot too).
• Then use the cardboard to cut out the shape from the polar fleece and foam.
• I trimmed the foam so that it was slightly smaller then the fleece.
• Pin the foam and fleece in place (foam on first and fleece on bottom), and sew onto the slipper with a whip stitch.