Print PDF
Favorite
Email
Step 12Sew the two hat pairs together.
Take the piece with the wires in it, and lay it down so the right sides are out and you can see the folded-up whiskers!
Take the other piece of the hat, and turn it wrong side out. Place the right side out piece into the wrong side out piece and line up the middle seams.
Pin all around the edges of the hat, making sure to designate a place 5-6 inches long at the very bottom back to turn it right side out. Start sewing right below that place and go all the way around.
On the corners, make sure you're leaving the needle in the fabric 1/4 inch away, raising the presser foot, turning, and lowering it again. (Look below for step by step pictures)
Take the other piece of the hat, and turn it wrong side out. Place the right side out piece into the wrong side out piece and line up the middle seams.
Pin all around the edges of the hat, making sure to designate a place 5-6 inches long at the very bottom back to turn it right side out. Start sewing right below that place and go all the way around.
On the corners, make sure you're leaving the needle in the fabric 1/4 inch away, raising the presser foot, turning, and lowering it again. (Look below for step by step pictures)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
