Sew a set of upcycled sweater fingerless gloves

Step 3 Cutting the gloves

Pull one of the sleeves on so that the end of it lies just above the lowest joints of your fingers. This will allow for maximum warmth AND movement. Bend your elbow, and mark the point where the sleeve creases with a pin. Remove the sweater arm and lay it flat on the table.

Cut straight across the end of the sleeve marked with the pin. This is the end of your glove. Once the seam allowance is turned under and sewn, this length will be slightly shorter than the length of your forearm, and will allow for maximum movement. Lay the cut sleeve on top of the uncut sleeve. and cut the second sleeve to the same length as the first.