Print PDF
Favorite
Email
Step 3Mark and Cut out the pieces
Piece 1 - The headband
Place the shearling hide side up and mark the rectangular pattern on it.
Cut the skin with a sharp knife along a straight edge.
The fleece will part when pulled.
Piece 2 - The top
Place the scrap of soft leather inside up to mark the oval and its darts.
I use talcum powder in a bag to wipe around the edge of the pattern. I shows up well on dark leather and is easy to remove when cleaning up.
Cut the oval out with a knife or shears.
Do not cut the darts at this time.
Piece 3 - The lining
Pin the top pattern to the wool piece and cut out. Again not cutting the darts.
Place the shearling hide side up and mark the rectangular pattern on it.
Cut the skin with a sharp knife along a straight edge.
The fleece will part when pulled.
Piece 2 - The top
Place the scrap of soft leather inside up to mark the oval and its darts.
I use talcum powder in a bag to wipe around the edge of the pattern. I shows up well on dark leather and is easy to remove when cleaning up.
Cut the oval out with a knife or shears.
Do not cut the darts at this time.
Piece 3 - The lining
Pin the top pattern to the wool piece and cut out. Again not cutting the darts.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
