Print PDF
Favorite
Email
Step 4Aligning the Transfer
Measure the size of the transfer and cut the fabric approximately 1 inch larger on each side of the transfer. (image 1)
Fold fabric into quarters and mark half of the measurement.
This is where your transfer will line up on the fabric.
For example - the transfers width was 6 inches, so on the quarter fold i mark 3 inches down. (image 2)
Line the transfer up to the chalk marks with the transfer facing up. Gently score the transfer where the speaker button holes will go. Lift the scored paper and mark with tailors chalk. (image 3)
Now flip the transfer over so that the image is against the fabric and line it up to the chalk guideline marks. (image 4)
Fold fabric into quarters and mark half of the measurement.
This is where your transfer will line up on the fabric.
For example - the transfers width was 6 inches, so on the quarter fold i mark 3 inches down. (image 2)
Line the transfer up to the chalk marks with the transfer facing up. Gently score the transfer where the speaker button holes will go. Lift the scored paper and mark with tailors chalk. (image 3)
Now flip the transfer over so that the image is against the fabric and line it up to the chalk guideline marks. (image 4)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
