Print PDF
Favorite
Email
Step 2Cut Your Fabric
Branch:
Measure your door or other drafty area (window).
Take this measurement and add 1 1/2". This is the length you cut your "wood" fabric. Measure and mark the fabric, then cut and set aside.
Twigs:
Measure and mark the remaining "wood" fabric at 2 3/4" and 5 1/2", then cut and set aside.
Leaves:
Make a leaf pattern on paper. Approximately 2 1/2-3" long and 1-1 1/2" wide or however large or small you want. Cut out multiples of this leaf pattern.
Using the "leaf" fabric fold wrong sides together and pin leaf pattern pieces to the right side. Cut out the leaves; keeping pins and pattern pieces attached (so the leaves stay aligned).
Measure your door or other drafty area (window).
Take this measurement and add 1 1/2". This is the length you cut your "wood" fabric. Measure and mark the fabric, then cut and set aside.
Twigs:
Measure and mark the remaining "wood" fabric at 2 3/4" and 5 1/2", then cut and set aside.
Leaves:
Make a leaf pattern on paper. Approximately 2 1/2-3" long and 1-1 1/2" wide or however large or small you want. Cut out multiples of this leaf pattern.
Using the "leaf" fabric fold wrong sides together and pin leaf pattern pieces to the right side. Cut out the leaves; keeping pins and pattern pieces attached (so the leaves stay aligned).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
