Print PDF
Favorite
Email
Step 7The Sleeves and Hood
To minimize the amount of waste fabric we want to go ahead and unfold the fabric and fold it width-wise, again inside out so the back is the surface we are marking on. Fold just enough to make Sleeves See Picture #1
Lay your Sleeve Pattern so that the outside measure - the Purple Line - is Flush on the fold. Trace with fabric marker and cut out the fabric. See Picture #2.
Not Pictured - The Hood. The Hood is done in the similar fashion as the Sleeve. The TOP of HEAD is flush with the Fold. Make two just like the Sleeve. The second one will be the liner for the hood. Trace the pattern and cut out the fabric. Remeber to cut OUTSIDE the line.
Lay your Sleeve Pattern so that the outside measure - the Purple Line - is Flush on the fold. Trace with fabric marker and cut out the fabric. See Picture #2.
Not Pictured - The Hood. The Hood is done in the similar fashion as the Sleeve. The TOP of HEAD is flush with the Fold. Make two just like the Sleeve. The second one will be the liner for the hood. Trace the pattern and cut out the fabric. Remeber to cut OUTSIDE the line.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
