Print PDF
Favorite
Email
Step 5Extrude Boss for Straight Portion of Leg
Select Extrude Boss, and move the Extrude Boss dialog box if required to see the extrusion preview.
Set the Depth of the extrusion to 3" for the flat portion of the leg, Select the Edit Equation button to the right of the Depth value to use the Equation Editor to designate this Parameter as Straight_Length , and Label this feature as Leg Top.
Select OK to create the extrusion for the Leg top.
This is a good time to save your work under the suggested name of Shaker Leg.
Set the Depth of the extrusion to 3" for the flat portion of the leg, Select the Edit Equation button to the right of the Depth value to use the Equation Editor to designate this Parameter as Straight_Length , and Label this feature as Leg Top.
Select OK to create the extrusion for the Leg top.
This is a good time to save your work under the suggested name of Shaker Leg.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
