Ship's Helm

Step 9 Blocking the Spokes

I figured I would need to strengthen the spokes and prevent them from pulling out of place. Hence, you need to make these blocks. These ones are scrap pine leftover from the spokes - 45 x 25mm- cut to the width of the ring less 6mm. Glue these in position . Aquadhere or Bondall are both suitable glues. You can add a cabinet nail or two to hold them while glue sets. They should be positioned with the radius of the circle in mind AND short enough to accomodate plywood infill sections. Ensure glue is dry before starting the next step