Instructables
Picture of Shirred/Smocked Pillowcase Top from Valerie
IMG_1528.JPG
There are some things that pillowcases lend themselves to so beautifully that it would be silly not to try it. This is one of those.

Shirring is really simple. However, for this project, you will use your iron as much as your sewing machine, so make sure that when you start this project, you have both ready and on hand. Then it can be finished in next to no time.

Step 1: For this project, you will need:

1 pillow case
matching or coordinating thread
sewing machine
elastic thread
iron and ironing board

Step 2:

First, measure your child from arm pit to where you want the shirt to go. For Cyan (long torso and size 8) she measures about 17 inches. Measuring from the bottom of the pillowcase, I add one inch to that length (for seam allowance and gathering factor) and cut the rest off the closed end of the pillow case. (Keep aside for straps.)

Step 3:

Picture of
Then make a small hem at the cut edge to finish it off. Not too big, about 1/2 inch is great. Iron the edge with the pillow case seam (there is only one) at the back center.

Step 4:

Now, wind your bobbin with elastic thread. This thread can be found at any sewing and craft store. The top thread will remain the same, so you want to pick one that either matches or compliments your pillowcase really well.

Step 5:

Picture of
Starting at the top where the hem is, stitch the hem with the elastic thread underneath all the way around following the hem. It will not look like it is doing much gathering at this point. This is very normal.

Step 6:

Picture of
Now move your fabric over so that the hem is on the right edge of the presser foot. This is where you sew your next line of gathers. If you use your presser foot as a gage to where your stitches are supposed to go, you end up with very neat and strait gathers without having to measure every line.


 
Remove these adsRemove these ads by Signing Up
kharmer2 years ago
Thanks for sharing this creative idea. I have 4 nieces that I would like to make these for, my question is, since they range in age and size from 5-12 how would I adjust the size via the shirring? I appreciate your help, as I am anxious to get sewing.
Aloha~ Karen
Ninzerbean5 years ago
So when you say to put a lock stitch in is that because you are not going to pull the threads to gather the smocking? That is so fabulous - I had no idea how that was done or how you would know how much to pull each one but you are not pulling at all, you are letting the steam and elastic do the trick? Great ible!
BlueRoseMama (author)  Ninzerbean5 years ago
Yes... no thread pulling! I have made that same top with the smocking done the 'old fashioned way' and it nearly drove me to tears. This way is much easier. :)
canida5 years ago
This looks great! Such a little bit of effort to make a pillow case look completely different. You might add a bit more information on smocking for those who aren't familiar with gathers.
BlueRoseMama (author)  canida5 years ago
Hi there! I am not sure what I should add. I would love some input, or perhaps a specific question to answer so I can best give the information you were looking for. I have made several of these for my dd and the one pictured has quickly become one of her favorite tops. It looks GREAT with a jean jacket and a pair of khakis. :) Val
Maybe some advice on sewing with elastic thread would be good? Just a link to the how-to of your choice would help people get into it. I know how to do it, but it's a mystery to a lot of people. I don't know if there's one on here (I haven't found it yet if there is), but this post: http://www.dana-made-it.com/2009/07/baby-pink.html links to a lot of other tutorials on it. If my camera weren't dead, I'd put one up myself.

Sewing with elastic is like MAGIC for kids clothes. Also great for waistbands for little ones still in diapers. The little pants come on and off with more ease than a single heavy band and there's no elastic to dig into the baby's tummy. You can use (if my memory serves) the same pillowcase trick for a high-waisted skirt. This is also useful when you're sewing for disabled children or autistic children of either gender who may be very sensitive to anything snug around the waist.
BlueRoseMama (author)  0jack5 years ago
Good idea. This is a link that shows how to do it. I will add more images of the elastic thread and how you do it to the tutorial later.

http://www.craftstylish.com/item/27550/how-to-create-elastic-shirring

Perhaps just a couple pictures showing how to put the elastic thread into the bobbin and what to buy etc. Good suggestions. I'll fix soon.
imaluma5 years ago
I am a super beginner and not sure I understand this. You mean you stretch the part you just sewed flat and iron it, then let it go back?
BlueRoseMama (author)  imaluma5 years ago
No, you just put your hot iron with lots of steam over the smocked part, and it will gather a bunch more than it was when you were sewing it. The steam makes the elastic thread contract, making the project gather tightly. Hope that helps! Val