Print PDF
Favorite
Email
Step 3Open the case
First, remove the 8 small phillips-head screws on the back
Second, pry off the front of the case using a flat-head screwdriver inserted above the rubber seal. The seal at first seems like it is glued together, but it is not. go around the rim slowly prying and the front of the case will eventually loosen and come off.
Second, pry off the front of the case using a flat-head screwdriver inserted above the rubber seal. The seal at first seems like it is glued together, but it is not. go around the rim slowly prying and the front of the case will eventually loosen and come off.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
