Introduction: Shocker

Picture of Shocker

This is a shocker which u can build easily. U can shock people just with one 9 volt battery

Step 1: Materials

Picture of Materials

Materials-
A transformer from a charger
A metal rod or even wood or plastic
A 9 volt battery
A long metal piece
Wires

Step 2:

Picture of

Take the transformer and stick it to the long metal piece

Step 3:

Picture of

Take the metal piece and connect it to a wire

Step 4:

Picture of

Take the smaller metal piece and connect it to one end of the battery

Step 5:

Picture of

Take a long wire and connect it to one end of the out put terminal

Step 6:

Picture of

Connect the other terminal of the transformer
To the other terminal of the battery

Step 7: Working

Picture of Working

When the actual input of the transformer is touched on someone and then touch the longer wire to the small metal piece the person gets shock

Step 8:

When the current goes to the transformer it increases and when we touch the longer wire to the small metal piece the circuit completes and the person touching the other terminal of the transformer gets a shock

Comments

sorry but this can't actually work, transformers need AC current as they rely on a changing flux. your 9 volt produces dc current so if it ever produces a high voltage with this device it will only be for the first few milliseconds when it is turned on. as a bit of advice with any electronics instructable it helps to provide a quick circuit diagram to show how it all fits together.

He forgot to mention that we need to rub the metal pieces and the free terminal of the transformer to create a flux in the dc current from the battery which is like ac current.you should do this because the transformer runs on ac current.