Shoe Tower - a free standing, multi-tier floating shoe rack

Step 6 Final assembly

Slot one of each of the rods into the holes on one side of the wooden frame. Add a nut to the end of the rod on the other side and do up the nut on the inside tight so that there is very little thread poking out on the outside.

Lay the frame flat on the floor and drop the second part of the frame on top. Screw the final nuts down on top and screw the inside ones for that side up to meet the frame.

Tighten up all the nuts with a spanner to stop them coming undone and stand it up the right way.