Instructables
Picture of Shotgun
DSC00347.JPG
6 barrels
Ammo: red rods

Loading the gun: video
(rubber bands where removed because I was loading it whit one hand)
 
Remove these adsRemove these ads by Signing Up

Step 1: 3 top barrels

Picture of 3 top barrels
DSC00281.JPG
DSC00282.JPG
DSC00283.JPG
3 top barrels

Step 2: 3 other barrels

Picture of 3 other barrels
DSC00285.JPG
DSC00286.JPG
Picture 1 - 3: part 1
Picture 4: part 2 and 3
Picture 5 - 6: part 4
Picture 7 - 8 part 5
Picture 9: part 6 and 7
Picture 10 - 12: combine part 4, 5, 6 and 7
Picture 13 add part 2 and 3
Picture 14: add part 1

Step 3: Handle

Follow the pictures

Step 4: Firing pin

Picture of Firing pin
DSC00301.JPG
Create 6 of them

Step 5: Finishing

Putting everything together
1-40 of 75Next »
Batman414 years ago
is there anything else i can use other than hinges, because i don't have any
i know, they never include any in the new kits and I have only like  5

and I wish someone would build a full auto assault rifle with a scope and a shotty attachment, ok, im going to try to build one
Don't even try someone made a full auto mec and it was just a prototype and it emptied the mag in like 2 seconds.
popomaster6 years ago
(removed by author or community request)
 i really think you should
ye u should man that looks cool
pllleeeaaassseee pppooosssttt!!!!!!!
Sure!!! post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post post
lol, i already posted the instructable 3 months back. you replied kinda late
Did you get rid of it cuz i don't see it.
yeah, the instructions werent completed and i didn have enough time to make instructions
lol
... ok... :S
check it out!
it is a great gun but you could add a stock...
it doesnt need one.
gunlover444 years ago
i think this might be one of the coolest things that was ever built
 
kevin29015 years ago
I can't shoot the bottom 3 barrows for some reason.
yannyboy5 years ago
does it shoot well?
That handle and trigger mechansim is ridiculous
i know right! i just built this, all i need to do is tape up the rams and do a little modding to it.
Nice! let me know if it is worth building
its pretty good! it needed a little moding but it works well and sprays red rods every were!
leem19946 years ago
Dude that is THE most coolest gun I have seen so far! I hope u contenue posting sweet k-nex guns like this!
dsman1952766 years ago
i kust noticed! this uses the same type of system the sr-v1 uses. but insted you have a ram! you should have made this into a sniper!
ok itz official dude you have MAD SKILZ
minerug6 years ago
Very clear pics taken for the instuctions- nice gun to
!revenge!6 years ago
cool gun like the loading system
I made some mods for this gun, I will post them when I finish building it(I only have all barrels and half of the handle). The mods include a better foregrip and barrel mods.
KneXguy1236 years ago
this looks ok, but i am making a way better shotgun that actually shoots 6 rods at once. I am halfway done with it. It has a 50 ft. range (all 6 go 50 ft.). Once I finish it I will post it. Its gonna be sweet. It will also have a 6 shot magazine.
It also only uses one barrel.
kirdaiht6 years ago
i did build a better shotgun, it only uses one rubberband, contains two barrels and is loaded with two bullets wich blow apart when they come out of the barrel. it contains a working trigger system, wich i haven;t seen on instructables yet. it is not on instructables yet because i want to know if i should post it or not, do i have to
Theodore1556 years ago
could look better....
Alingarhs7 years ago
Someone needs to make a sawed-off shotgun that "splits" down when you load it....im not creative enough to do it lol
alingarhs i did do that, but its not that great with large guns due to the w8 might make the thing go a little lower then normal, and then its not pump action...
What do you mean, "'splits'"?
You know how a saw-off works when you have to push it down to reload

like this....http://www.caw.co.jp/caw/m79/media/m79so_011.jpg

That'd be an easy mod. You'd just put the front barrel on a hinge.
yes but how pulling it down will load it? the hinge is just to make it break but the point is that pulling the gun down will also load it...(i mean cock the hammer).
u could attach a rope to the top of the barrel that folds down and route it back and then put a wheel to double back and attach it to the ram. tighten the rope so its long enough to pull the ram al the way back when the barrel is down
1-40 of 75Next »
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!