Introduction: Shotgun Shell Pen Holder

By

This tutorial will show you how to make a shotgun shell pen holder.

Step 1: What You Need

1. Two empty shotgun shells
2. A empty 30-6 shell
3. Hot glue gun
4. Extra glue if needed
5. Scissors
6. Pens
7. Any kind of decoration (optional, hides the glue)

Step 2: Dots

Draw a dot right above the brass part of the shotgun shell on both with a pen.

Step 3: Small Hole

Poke a small starter hole with the scissors at the dot.

Step 4: Slice

Cut along the brass until it is in half. (look at the pic)

Step 5: Cut Up the Middle

Slice up the middle exactly in the center of the cut area by the brass. Then bend it open like the picture. Do the exact same thing with the other shell.

Step 6: Gluing

Glue along the cut part on both sides and stick the two together.

Step 7: Add Your 30-6 Shell

Put glue along the top brass part and secure your shell. The best way to put it up is to tack it to a board or wall.

Step 8: Decorate

Put on something from a necklace on it, or come up with something on your own. This will cover the glue.

Step 9: Finished

Put in your pens and you're done.