Introduction: Shower Cleaner

Picture of Shower Cleaner

We have thought of an automated system for cleaning the shower box. It uses a sliding system that in various steps and with the use of liquid liquid detergent, clean the shower box.

Step 1: Filling Test for Water Tank

Picture of Filling Test for Water Tank

In this step we used a water sensor and a buzzer to simulate the filling of the main tank with water.

Step 2: Test to Reach the Boundary Position of the Cleaner

Picture of Test to Reach the Boundary Position of the Cleaner

In this step we used an IR Distance Interrupter and a Buzzer to simulate the reaching of the boundary position of the cleaner (bottom side of the Shower Box)

Step 3: Test of the Water Pump for Spraying Soap or Water Into the Shower Box

Picture of Test of the Water Pump for Spraying Soap or Water Into the Shower Box

In this step we simulate the spray system start and stop (for soap or water) using a button and a relay

Step 4: Tests for Rinsing Function

Picture of Tests for Rinsing Function

In this step we used a Button, a Relay and a Mini Water Pump to simulate the rinsing of the shower box.

Comments

DIY Hacks and How Tos (author)2016-03-13

Awesome project. Thanks for sharing.

About This Instructable

348views

4favorites

License:

More by aristide62:Shower Cleaner
Add instructable to: